Redesain penampang kabel wiring APP pelanggan TM untuk perbaikan akurasi pengukuran kWh

Main Article Content

Fadjar Kurniadi

Abstract

Abstract


Current Transfomer(CT) accuracy for big customers is very important. Constraints Execution of CT accuracy testing on big customers is quite a lot of customers and scattered, and longtime outage duration. Development of electronic kwh Meter for checking on-site CT customers as a solution to these problems. The onsite CT measurement method is carried out by comparing the primary and secondary of the CT by utilizing the current coil on the electronic kWh Meter. This method has several advantages, lower costs, easy procurement, easy and fast operation, so the duration of outages can be minimized. This method is very supportive in the implementation of the Revenue Assurance program.


 


Keywords: English, , 3-5 words


 


 


ABSTRAK


Akurasi CT (Current Transfomer) pada pelanggan besar sangat penting. Kendala Pelaksanaan pengujian akurasi CT pada  pelanggan besar adalah  pelanggan cukup banyak dan tersebar, dan waktu pemadaman yang lama. Pengembangan kwh Meter Alat untuk pengecekan CT Pelanggan secara on site sebagai solusi permasalahan tersebut. Metode penugukuran CT onsite dilaksanakan dengan membandingkan sisi primer dan sekunder CT dengan memanfaatkan kumparan arus pada kWh Meter elektronik. Metode ini memiliki beberapa keuntungan, antara lain biaya lebih murah, mudah pengadaan,mudah dan cepat dalam pengoperasiannya sehingga lama pemadaman dapat diminimalkan. Cara  ini sangat mendukung dalam pelaksanaan program Revenue Assurance dalam memastikan kebenaran CT yang terpasang.


 


Kata kunci: Electronic Meter, CT Testing

Downloads

Download data is not yet available.

Article Details

How to Cite
Kurniadi, F. (2020). Redesain penampang kabel wiring APP pelanggan TM untuk perbaikan akurasi pengukuran kWh. Energi & Kelistrikan, 12(2), 165 - 169. https://doi.org/10.33322/energi.v12i2.1173
Section
Articles

Most read articles by the same author(s)

Obs.: This plugin requires at least one statistics/report plugin to be enabled. If your statistics plugins provide more than one metric then please also select a main metric on the admin's site settings page and/or on the journal manager's settings pages.