Rancang Bangun Sistem Pemadam Kebakaran Box Panel Outdoor Menggunakan Arduino Uno Berbasis GSM SIM800L V1

Main Article Content

Lanina Milenise Fisabili
Tri Wahyu Oktaviana Putri

Abstract

With the installation of electrical installations on the panel box, there is a risk of interference causing fires caused by electricity due to short circuits, burning cables due to poor insulators and MCBs being burned due to overload. So we need a fire extinguishing system on the panel box that can minimize the risk of a large fire and can be monitored remotely. The extinguishing system consists of Arduino Uno as a microcontroller to process data, Infrared sensor KY-026 and temperature sensor DS18B20 as input to detect fire and excess temperature in the box panel. The MG995 Servo Motor and buzzer are used as outputs for the APAR drive and provide early warning. GSM SIM800L V1 as a remote communication to provide notifications to cell phones when fires and excessive temperatures occur. The test results in this study is a fire extinguishing system with KY-026 Infrared sensor which is able to detect fire at an angle of 60°. The DS18B20 temperature sensor detects a temperature of 41°C indicating overheating, as well as the MG995 Servo Motor rotates 90° and the buzzer sounds an alarm then the GSM SIM800L V1 sends a notification remotely which is 1210 meters or even more.

Downloads

Download data is not yet available.

Article Details

How to Cite
Fisabili, L. M., & Oktaviana Putri, T. W. (2021). Rancang Bangun Sistem Pemadam Kebakaran Box Panel Outdoor Menggunakan Arduino Uno Berbasis GSM SIM800L V1. SUTET, 11(1), 51–60. https://doi.org/10.33322/sutet.v11i1.1494
Section
Articles

References

Armando, Refky, R. P. (2019). Prototipe Perangkat Pendeteksi Api dan Suhu Pada Box Panel Kontrol Listrik Di Kapal. Teknik Elektro, Fakultas Teknik, Universitas Maritim Raja Ali Haji, 3(2252), 58–66.

Alfalah, & Widodo, T. S. (2009). Alat Pencegah Kebakaran Berbasis Mikrokontroler AT89851 Pada Box Panel Kontrol Listrik. Teknik Elektro, 1(1).

Hakim, L., & Halim, J. (2018). Peringatan Kebakaran Hutan Menggunakan Sensor Api , Suhu dan Asap. Seminar Nasional Teknologi Informasi Dan Komunikasi, 14, 26–38.

Nusyirwan, D., Ajay, A., & Putra Perdana, P. P. (2019). Rancang Bangun Sistem Deteksi Kebakaran Pada Ruang Kelas Berbasis Mikrokontroller. Dinamika Rekayasa, 15(2), 95. https://doi.org/10.20884/1.dr.2019.15.2.274

Sari, S. P., Candra, O., & Asmi, J. (2020). Alat Pendeteksi Kebakaran Menggunakan SMS. 1(2), 251–254.

Sasmoko, D., & Mahendra, A. (2017). Rancang Bangun Sistem Pendeteksi Kebakaran Berbasis IoT Dan Sms Gateway Menggunakan Arduino. Simetris : Jurnal Teknik Mesin, Elektro Dan Ilmu Komputer, 8(2), 469. https://doi.org/10.24176/simet.v8i2.1316.

Apriyaningsih, M., Muid, A., & Nurhasanah, N. (2017). Prototipe Sistem Pemadam Kebakaran Otomatis Berbasis Mikrokontroler Atmega328p. PRISMA FISIKA, 5(3), 106-110.

SIMCom.(2013).Sim800L_Hardware_Design_V1.00.1–70.http://wiki.seeedstudio.com/images/4/46/SIM800L_Hardware_Design_V1.00.pdf

Husada, H., & Samsurizal, S. Sistem Pemantauan Temperatur dan Kelembaban Menggunakan Instrumentasi Virtual Sebagai Pendeteksi Dini Bahaya Kebakaran. TESLA: Jurnal Teknik Elektro, 21(2), 113-122.

Sutyanegara, A. (2019). Rancang Bangun Prototype Sistem Pemantauan Kebocoran Pipa Landfill Gas (LFG) Pada Pltsa Berbasis Mikrokontroler Node Mcu Esp8266 Dengan Metode Internet Of Things (IOT). Repository Sekolah Tinggi Teknik PLN.